Canon imagePROGRAF iPF750 MFP M40 - Manual (Page 697)

Setting Item Description, Instructions
Inter-
face
Setup TCP/I
P IPv4 IPv4
Set-
tings IP Address Specify the printer network information when using a
static IP address.
Enter the IP address assigned to the printer, as well as
the network subnet mask and default gateway.
Subnet Mask
Default G/W
DNS
Set-
tings DNS Dync update Specify whether DNS server registration is updated
automatically.
Pri. DNS
SrvAddr Specify the DNS server address.
Sec. DNS
SrvAddr
DNS Host Name Specify the DNS host name.
DNS Domain
Name Specify the DNS domain name.
IPv6 IPv6 Support Specify whether to connect via IPv6.
IPv6 StlessAddrs Specify whether a IPv6 stateless address is used.
DHCPv6 Specify whether DHCPv6 settings are used.
DNS
Set-
tings DNS
Dync
update State-
full
Addr Specify whether DNS server registration is updated
automatically.
State-
less
Addr
Pri. DNS
SrvAddr Specify the DNS server address.
Sec. DNS
SrvAddr
DNS Host Name Specify the DNS host name.
DNS Domain
Name Specify the DNS domain name.
Net-
Ware NetWare Specify the NetWare protocol. To apply your changes,
choose Register Setting.
Frame Type Specify the frame type to use.
Print Service Choose the print service.
AppleTalk Specify whether to use the AppleTalk protocol. To ap-
ply your changes, choose Register Setting.
Ether-
net
Driver Auto Detect Specify the communication method. To apply your
changes, choose Register Setting.
Choose On for automatic configuration of the LAN
communication protocol. Choose Off to use settings
values of Comm.Mode and Ethernet Type.
Comm.Mode Choose the LAN communication method.
Ethernet Type Choose the LAN transfer rate.
Spanning Tree Choose whether spanning-tree packets are supported
over the LAN.
Control Panel > Printer Menu >
iPF750 Menu Settings
8
681