Canon imagePROGRAF iPF750 MFP M40 User Manual
Page 723
Item
Details
Default Setting
Prefix Length
Enter the IP address prefix length.
0
Default Router Ad-
dress
Enter the default router address.
::
Prefix Length
Enter the prefix length of the default router address.
0
Primary DNS Server Address
Specify the IP address of the primary DNS server.
::
Secondary DNS Server Address
Specify the IP address of the secondary DNS server.
::
Use the same host name and do-
main name as IPv4
Activate when using the same DNS host and domain
names as for IPv4.
Off
DNS Host Name
Specify the printer host name, up to 63 characters (1–
63 characters). Use single-byte letters, numbers, and -
(hyphens). Do not use numbers or - for the first charac-
ter or - for the last character.
NB-18GBip6xxxxxx
DNS Domain Name
Specify the printer domain name, up to 63 characters.
Use single-byte letters, numbers, - (hyphens), and . (pe-
riods). Do not use numbers, -, or . for the first charac-
ter, or - or . for the last character.
blank
Perform dynamic updating of
stateful addresses
Activate this setting to automatically register the state-
ful address with the DNS server.
Off
Dynamically update the stateless
address
Activate this setting to automatically register the state-
less address with the DNS server.
Off
Dynamically update the manual
address
Activate this setting to automatically register the man-
ual address with the DNS server.
Off
7.
Click OK to display the Network page.
Note
• If you are using a DNS server, select Enable DNS Dynamic Update and enter the IP Address for DNS serv-
ers and DNS domain name in Primary DNS Server Address, Secondary DNS Server Address and DNS
Domain Name, respectively.
Network Setting
>
Initial Settings
>
iPF750
Configuring the Printer's TCP/IP Network Settings With RemoteUI
9
707