Canon imagePROGRAF iPF750 MFP M40 User Manual
Page 699
Setting Item
Description, Instructions
System
Setup
Keep Paper Size
Choose Off to give priority to margin settings. The
larger value is used if the margin specified in the print-
er driver does not match the margin in the printer
menu
TrimEdge Reload
Specify whether to trim the leading edge of the cur-
rently retracted roll when the roll is advanced. Cut the
edge if you are concerned about any marks left on the
roll when the roll is left in the retracted position.
Specify On to have rolls cut when printing begins af-
ter Sleep mode or when the power is restored. Select-
ing Automatic will trim the edge when the roll has
been in the retracted position for two days or more.
Rep.P.head Print
Choose On to have the printer automatically execute
the Advanced Adj. operations after you replace the
Printhead. (See "Automatic Adjustment to Straight-
en Lines and Colors (Head Posi. Adj.).")
Nozzle Check
In Frequency, specify the timing for automatic checks
of nozzle clogging. Choose Standard to have the
printer adjust the timing for checks based on the fre-
quency of nozzle use. Choose 1 page to check once
per page.
Select Warning > On to display warnings if the noz-
zles clog during printing.
Use RemoteUI
Choosing Off prohibits access from RemoteUI. Set-
tings can only be configured from the control panel.
Reset PaprSetngs
Restores settings that you have changed with Media
Configuration Tool to the default values.
Show Job Log
Selecting Off prevents display of the log in Job Menu
> Job Log. Additionally, the log is not printed if you
choose Job Menu > Print Job Log. Note that because
job logs are not collected, the Status Monitor account-
ing functions will not work correctly.
Prep.MovePrinter
Select this option when transferring the printer to an-
other location. Follow the instructions displayed to
complete the required procedure. (See "Preparing to
Transfer the Printer.")
Not displayed during a warning message that the re-
maining Maintenance Cartridge capacity is low.
Admin.
Menu
Change Password
By setting a password, you can restrict menu display
and configuration as follows. You can input between 0
and 9999999.
Control Panel
>
Printer Menu
>
iPF750
Menu Settings
8
683