Paper detailed settings dialog box, P.225 – Canon imagePROGRAF iPF750 MFP M40 User Manual
Page 241
Paper Detailed Settings Dialog Box
The Paper Detailed Settings dialog box offers the following settings. For details on settings items, refer to the printer driv-
er help.
Note
• To display the Paper Detailed Settings dialog box, on the Main sheet, click Settings by Media Type.(See
•
A
Drying Time
Specify the time that the printer waits for ink to dry, as needed. The Drying Time setting is only valid for rolls.
• (See "Specifying the Ink Drying Time for Rolls
")
•
B
Between Pages
Specify the time the printer waits after printing a page until ejecting the paper, as needed.
•
C
Between Scans
Specify the time the printer waits after printing a line on the page until printing the next line, as needed.
•
D
Roll Paper Margin for Safety
You can specify the length of a margin on the leading edge of paper to ensure that paper susceptible to curling is held
firmly against the Platen.
•
E
Near End Margin
Specify the length of the Near End Margin (the leading edge margin) of the roll, as needed.
•
F
Cut Speed
Select the speed of automatic cutting, as needed. You can adjust this setting if paper is not cut well when automatic
cutting is used.
•
G
Mirror
Specify whether to print a mirror image, as needed. Select this option to print a version of the document or image with
the left and right sides inverted.
Windows Software
>
Printer Driver
>
iPF750
Paper Detailed Settings Dialog Box
3
225