Canon imagePROGRAF iPF750 MFP M40 - Manual (Page 379)

7.
After AutoCAD starts, select Plotter Manager from the File menu.
The Plotters window opens. Click the Add-A-Plotter Wizard icon.
8.
The Add Plotter - Introduction Page screen opens. Check the displayed screen and then click the Nextbutton.
Note
• To open the Add-A-Plotter Wizard you can also click Start > Control Panel > Autodesk Plotter
Manager > and then double-click the Plotter Wizard icon in the Plotters window.
Windows Software > HDI Driver >
iPF750 Installing with the Canon Installer
3
363