Canon imagePROGRAF iPF750 MFP M40 - Manual (Page 662)

a. Accessory Pocket
Stores printer accessories.
b. Output Stacker
Printed documents are ejected into the output tray.
c. Locking Caster
Lock to immobilize the caster.
Before moving the printer, always unlock all four casters. Moving the printer while casters are locked may scratch
the casters or the floor.
d. Adjustable Stopper
Pull out depending on the paper size when using the output stacker in the Extended position A.
For details on the extended position, see "Using the Output Stacker."
→P.611
e. Paper Guide
Guides printed documents into the output stacker.
f. Output stacker handle
This handle is grasped and supports the sliding output stacker when putting the output stacker into Extended posi-
tion B and returning it to the regular position.
For details on the extended position, see "Using the Output Stacker."
→P.611
g. Output stacker release lever
Pull this lever towards you to release Extended position B.
For details on the extended position, see "Using the Output Stacker."
→P.611
h. Output Stacker Ejection Guides
This guide supports the paper that is output when using the output stacker in Extended position B.
Note
• The Stand that can be used with this printer is Printer Stand ST-34 and Printer Stand ST-33. Either one or the
other of these Stand is included with the printer depending on the region and time when you purchased the
printer.
• The output stacker of the Printer Stand ST-33 has a regular position and an Extended position A.
For details on the extended position, see "Using the Output Stacker." →P.611
• The Stand is described in the illustration of Printer Stand ST-34. Note that the illustrations may look different
from the appearance of your printer in some cases.
Printer Parts > Printer parts >
Stand iPF750
7
646