Canon imagePROGRAF iPF750 MFP M40 - Manual (Page 694)

Setting Item Description, Instructions
Adjust
Printer Feed
Priori-
ty Adjust
Length Adjust-
ment-
Print A:High Print a test pattern for particular types of paper to
compensate for paper stretching or shrinkage, after
which you enter the amount of adjustment. (See "Ad-
justing Line Length (Adjust Length).")
→P.634
B:Standard/Draft
Chang
e Set-
tings A:High Displayed when you have selected Feed Priority >
Adj. Priority > Print Length.
Adjustment relative to the amount of stretching or
shrinkage of the current paper.
Enter either the adjustment results from Adjustment-
Print or the discrepancy that you measured (as a per-
centage).
For paper that tends to stretch, increase the feed
amount by choosing a higher adjustment value. For
paper that tends to shrink, decrease the feed amount by
choosing a lower adjustment value.
B:Standard/Draft
Main-
te-
nance Head Cleaning Clean the Printhead. (See "Cleaning the Printhead.")
→P.740
Choose Head Cleaning A if printing is faint, oddly
colored, or contains foreign substances.
Choose Head Cleaning B if no ink is printed at all, or
if printing is not improved by Head Cleaning A.
Nozzle Check Print a test pattern to check the nozzles.
Replace P.head When replacing the Printhead, choose Yes and follow
the instructions on the screen. (See "Replacing the
Printhead.")
→P.741
Not displayed during a warning message that the re-
maining Maintenance Cartridge capacity is low.
Repl. maint cart When replacing the Maintenance Cartridge, choose
Yes and follow the instructions on the screen. (See
"Replacing the Maintenance Cartridge.")
→P.749
Head Info Indicates information about the printhead.
GL2 Replot Print the previous GL2 print job again.
GL2 BufferClear Clear the print data in the replot buffer.
GL2
Set-
tings Quality
Man-
ager Color
Mode Monochrome Print in monochrome.
Color (CAD) 1 Print in standard colors.
Color (CAD) 2 Print in brighter colors.
Color (CAD) 3 Print emulating the following printers, in colors re-
sembling colors produced by these printers: Canon BJ-
W3000/W3050.(*2
→P.684 )
Color (CAD) 4 Print emulating the HP Designjet 500/800, in colors
resembling colors produced by these printers.
(*2
→P.684 )
Color (CAD) 5 Print emulating the HP Designjet 1000, in colors re-
sembling colors produced by this printer.
(*2
→P.684 )
Print Quality Choose the print quality.
Input Resolution Choose the printer input resolution, 600dpi or 300dpi.
Control Panel > Printer Menu >
Menu Settings iPF750
8
678