Canon imagePROGRAF iPF750 MFP M40 - Manual (Page 146)

7.
Select and click a roll paper in the A Paper Source list.
8.
Make sure the width of the loaded roll is displayed in the B Roll Width list—in this case, 16 in. (406.4mm).
Note
• If the width of the loaded roll is not displayed in B Roll Width, click L Printer Information on
the Main pane and update the printer information.
9.
In C Page Size, make sure 100*500 is displayed, as registered in Page Setup.
10.
Select the D Enlarged/Reduced Printing check box.
11.
Click F Fit Roll Paper Width.
12.
Confirm the print settings, and click M Print to start printing.
Note
• For tips on confirming print settings, see "Confirming Print Settings(Mac OS X) →P.436 "
Printing on Non-Standard Paper Sizes
For printing on non-standard size paper, first register the paper size in the printer driver.
Once you register a paper size, you then can select it repeatedly from the paper size list. The paper size can be set up to 18.0
m.
Note
• In Windows, although you can even set Custom Size for the paper size, the maximum settable size is 3.2 m.
The setting of Custom Size is disabled when you exit the application software.
Enhanced Printing Options > Printing banners or at other non-standard sizes >
Printing on Non-Standard Paper Sizes iPF750
2
130