Paprwidth mismatch – Canon imagePROGRAF iPF750 MFP M40 User Manual

Page 829

Advertising
background image

"Replace roll with 10 in. wide or larger roll."

Cause

Corrective Action

The loaded paper is too small.

Replace the roll with a roll 10 inches in width or larger as follows.

1.

Press or to select Change Paper, and then press the OK button.
(See "Removing the Roll from the Printer.")

→P.585

(See "Removing the Roll Holder from Rolls.")

→P.589

2.

Replace the roll with a roll 10 inches wide or larger.
(See "Attaching the Roll Holder to Rolls.")

→P.575

(See "Loading Rolls in the Printer.")

→P.579

The printer will resume printing.

Press or to select Stop Printing, and then press the OK button.

"Remove paper and check pap. size"

Cause

Corrective Action

A sheet has come out of the printer during print-
ing.

1.

Press the Release Lever back and remove the paper.

2.

Reload the sheet, aligning it with the guide on the right.

3.

Pull the Release Lever forward.

4.

If "Not finished printing. Finish printing remaining jobs?" is
shown on the Display Screen, press the OK button.
Printing will resume, starting from the page on which the error
occurred.

(See "Loading Sheets in the Printer.")

→P.602

PaprWidth Mismatch

Cause

Corrective Action

When Detect Mismatch in the Control Panel menu
is set to Pause or Warning, the width of the loa-
ded roll does not match the width specified in Fit
Roll Paper Width
in the printer driver.

Press or to select Print, and then press the OK button to
resume printing.
However, note that this error may cause paper jams and affect
the printing quality.

Press or to select Stop Printing, and then press the OK
button.

Follow these steps to replace the roll to match the width speci-
fied in the printer driver.

1.

Press or to select Change Paper, and then press the
OK button.
(See "Removing the Roll from the Printer.")

→P.585

(See "Removing the Roll Holder from Rolls.")

→P.589

2.

Replace the paper with paper compatible for borderless print-
ing.
(See "Attaching the Roll Holder to Rolls.")

→P.575

(See "Loading Rolls in the Printer.")

→P.579

The printer now starts printing the print job.

Error Message

>

Messages regarding paper

>

iPF750

PaprWidth Mismatch

12

813

Advertising
This manual is related to the following products: