Canon imagePROGRAF iPF750 MFP M40 - Manual (Page 833)

Sheet printing is selected.
Cause Corrective Action
You have attempted to print a test print sheet or
other printer status information on a sheet, but
no sheet is loaded. Press ▲ or ▼ to select Load Cut Sheet, and then press the OK
button. Load the sheet, and then print.
(See "Loading and Printing on Sheets.")
→P.9
To print on rolls, follow these steps.
1. Press ▲ or ▼ to select Stop Printing, and then press the OK
button to stop printing.
2. Load a roll and try printing again.
(See "Loading and Printing on Rolls.") →P.6
Regular printing is selected, but a roll is loaded.
Cause Corrective Action
A print job for printing
on sheets was sent
when a roll is loaded. 1. Press ▲ or ▼ to select Remove Roll Paper, and then press the OK button to stop print-
ing.
2. After removing the roll, load and print on a sheet of the type and size of paper you have
specified in the printer driver.
(See "Removing the Roll from the Printer.")
→P.585
(See "Loading and Printing on Sheets.") →P.9
Paper jam
"Push the release lever back."
Cause Corrective Action
A paper jam oc-
curred in the
printer during
printing. 1. Push the Release Lever back and remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
→P.773
(See "Clearing a Jammed Sheet.") →P.777
2. Load the paper.
3. Pull the Release Lever forward.
4. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen,
press the OK button.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.") →P.579
(See "Loading Sheets in the Printer.") →P.602
Error Message > Messages regarding paper >
iPF750 Sheet printing is selected.
12
817