Avocent CCM4850 - Manual (Page 23)

11
CHAPTER
3
Operations
Overview
The CCM console management appliance and its ports are easily configured and managed to meet
your requirements for device connection, user authentication, access control, power status
monitoring, port history information display and Simple Network Management Protocol (SNMP)
compliance for use with third party network management products.
Configuring Serial Port Settings
By default, ports are configured with the settings listed in Table 3.1.
Most of these settings are standard serial port operating characteristics.
The CLI access character parameter specifies how you access the CLI. For more information, see
CLI mode on page 19.
Table 3.1: Default Port Settings
Parameter Value
Target device Console
Name xx-xx-xx Pn (last 3 octets of MAC address plus the port number)
Baud rate 9600
Bits per character 8
Parity None
Stop bits 1
Flow control None
Time-out 15 minutes
CLI access character Use Server CLI setting (^D)
Power None