Avocent CCM4850 - Manual (Page 77)

Chapter 5: CCM Appliance Commands 65
User Commands
The User command has several forms, as listed in Table 5.32.
User Add command
The User Add command adds a new user to the CCM user database. The user database holds a
maximum of 64 user definitions. For more information, see Managing User Accounts on page 20
and Access rights and levels on page 21.
Access right: USER
Access level: ADMIN or APPLIANCEADMIN
Syntax
USER ADD <username> [PASSWORD=<pwd>] [SSHKEY=<keyfile>] [FTPIP=<ftpadd>]
[KEY=<sshkey>] [ACCESS=<access>]
Table 5.32: User Command Summary
Command Description
User Add Adds a new user to the user database.
User Delete Deletes a user from the user database.
User Logout Terminates a user’s active session.
User Set Changes a user’s configuration information.
User Unlock Unlocks a locked-out user.
Table 5.33: User Add Command
Parameter Description
<username> 3-16 alphanumeric character username. Usernames are case sensitive.
PASSWORD=<pwd> 3-16 alphanumeric character password. Passwords are case sensitive.
SSHKEY=<keyfile>
Name of uuencoded public key file on an FTP server. The maximum file size that
may be received is 4K bytes. If this parameter is specified, you must also specify the
FTPIP parameter.
FTPIP=<ftpadd>
FTP server’s IP address. If this parameter is specified, you must also specify the
SSHKEY parameter.
KEY=<sshkey> Uuencoded SSH key.