Avocent CCM4850 - Manual (Page 70)

58 CCM4850 Installer/User Guide
terminated if a CCM SSH server key must be generated. You must also have previously specified
an authentication method other than None with the Server Security command.
If you enable plain text Telnet connections with a Server Security command, enabling SSH session
access with the Server SSH command will add that as a valid connection method (both plain text
and SSH connections will be allowed.)
For more information, see Connecting to devices using SSH on page 15.
Access right: SCON
Access level: APPLIANCEADMIN
Syntax
SERVER SSH ENABLE|DISABLE [AUTH=<auth>]
Show Commands
The Show command has several forms, as listed in Table 5.22.
Table 5.21: Server SSH Command Parameters
Parameter Description
ENABLE|DISABLE Enables or disables SSH session access to the CCM appliance.
AUTH=<auth>
SSH authentication methods. You must enter the entire value; abbreviations are not
permitted. Valid values are:
PW
Password authentication.
KEY Key authentication.
PW|KEY Password or key authentication.
KEY|PW Key or password authentication.
PW&KEY Password and key authentication.
KEY&PW Key and password authentication.
Default = PW
Table 5.22: Show Command Summary
Command Description
Show Port Displays configuration information and statistics for one or all ports.
Show Port Alert Displays port alert strings.
Show Server Displays CCM configuration information and statistics.
Show Server CLI Displays CCM CLI settings.
Show Server PPP Displays CCM PPP settings.
Show Server RADIUS Displays CCM RADIUS settings.
Show Server Security Displays CCM authentication, connection and security lock-out settings.