Avocent CCM4850 - Manual (Page 76)

64 CCM4850 Installer/User Guide
A Show User All command display includes the information in Table 5.31.
SPC Command
The SPC command is reserved for future functionality.
Table 5.30: Show User Command Display Fields
Field Contents
User Username.
Level
User’s access level. If a level was not configured, access rights determine the level:
Users with SCON access => APPLIANCEADMIN.
Users with USER or PCON but not SCON => ADMIN.
Otherwise, USER level is assigned.
Access User’s access rights.
Locked YES if user is locked-out, NO if not.
Last Login System up time value when the user logged in.
Port Serial port to which user is connected.
Username Username.
Duration Duration of user’s session.
Socket Telnet socket number.
From Socket Telnet client IP address and socket number.
Table 5.31: Show User All Command Display Fields
Field Contents
User Username.
Pass YES if user has a password defined, NO if not.
Key YES if user has an SSH key defined, NO if not.
Lock YES if user is locked-out, NO if not.
Level
User’s access level. If a level was not configured, access rights determine the level:
Users with SCON access => APPLIANCEADMIN.
Users with USER or PCON but not SCON => ADMIN.
Otherwise, USER level is assigned.
Access User’s access rights.