HP Designjet T1100 MFP series - Manual (Page 26)

Printer sharing considerations
● HP Easy Printer Care must be installed on a computer before it can be used from that computer.
● Any other users sharing your directly connected printer will be able to send print jobs, but will not
be able to receive information from the printer—which affects printer alerts, printer status reports,
paper management, printer administration and troubleshooting.
● Any other users sharing your directly connected printer will be unable to use the printer's own print
preview facility, although the application's print preview will still be available. See
Preview a print
on page 65 .
TIP: The best way to share the printer over a network is to connect the printer not to any
computer, but to the network. See Connect to a network (Windows) on page 12 .
Uninstall the printer software (Windows)
1. Insert the HP Start-Up Kit DVD into your DVD drive. If the DVD does not start automatically, run
the START.EXE program in the root folder of the DVD.
2. Select Install, and follow the instructions on your screen to uninstall the printer software.
Connect to a network (Mac OS)
You can connect your printer to a network under Mac OS X by using the following methods:
● Bonjour/Rendezvous
● TCP/IP
NOTE: The printer does not support AppleTalk.
Before you begin, check your equipment:
● The printer should be set up and on.
● The Ethernet hub or router should be on and functioning correctly.
● All computers on the network should be on and connected to the network.
● The printer should be connected to the network.
Now you can proceed to install the printer software and connect your printer.
Bonjour/Rendezvous connection
1.
Go to your printer's front panel and select the Connectivity menu icon , then Gigabit
Ethernet > View configuration. Note the mDNS service name of your printer.
2. Insert the HP Start-Up Kit DVD into your DVD drive.
14 Chapter 2 Installing the software ENWW
In
stalling th
e software