HP Designjet T1100 MFP series - Manual (Page 75)

NOTE: Under Mac OS, the available margins options depend on the paper size selected in
the Page Setup dialog. For instance, for borderless printing you must select a paper size name
that includes the words “no margins”.
● Standard. Your image will be printed on a page of the size you have selected, with a narrow margin
between the edges of the image and the edges of the paper. The image should be small enough
to fit between the margins.
● Oversize. Your image will be printed on a page slightly larger than the size you have selected. If
you cut off the margins, you will be left with a page of the size you selected, with no margins
remaining between your image and the edges of the paper.
● Clip Contents By Margins. Your image will be printed on a page of the size you have selected,
with a narrow margin between the edges of the image and the edges of the paper. In this case, if
the image is the same size as the page, the printer assumes that the extreme edges of the image
are either white or unimportant, and do not need to be printed. This may be useful when your image
already contains a border.
● Borderless. Your image will be printed on a page of the size you have selected, with no margins.
The image is slightly enlarged to ensure that no margin is left between the edges of the image and
the edges of the paper. If you select Automatically by Printer, this enlargement is done
automatically. If you select Manually in Application, you must select a custom page size slightly
larger than the page on which you intend to print. See also
Print with no margins on page 67 .
Print with shortcuts
The printer driver provides many options that can be set to different values when printing a particular
job. A printing shortcut stores the values of all these options that are appropriate for a particular kind of
job, so that you can set them all with a single click. Some settings (such as paper size, paper source,
and orientation) may be overridden by the values provided by your application.
To use a shortcut, select the Printing Shortcuts tab in the Windows driver dialog.
NOTE: Shortcuts are available only under Windows.
You can see a list of available shortcuts; select the one that matches the kind of job you want to print.
The driver options are now adjusted to suit your job. You can either print immediately, or examine the
settings to check that you agree with them. If you like, you can select a shortcut and then change some
of its settings manually.
ENWW Print with shortcuts 63
Printin
g