Custom paper sizes, Select margins options – HP Designjet T1100 MFP series User Manual
Page 74
NOTE:
The paper size specified here should be the paper size in which the document was
created. It is possible to rescale the document to a different size for printing. See
●
In the Windows driver dialog: select the Paper/Quality tab, then Document Size.
●
In the Mac OS Page Setup dialog: select your printer from the Format for list, then select your
paper size from the Paper Size list.
●
On the Embedded Web Server's Submit Job page: select Advanced settings > Paper > Page
size > Standard.
●
Using the front panel: select the Setup menu icon
, then Printing preferences > Paper >
Select paper size.
NOTE:
If the paper size is set from your computer, it overrides the paper size setting in
the front panel.
Custom paper sizes
To choose a non-standard paper size not shown in the list of paper sizes:
●
Under Windows, there are two different ways:
●
In the driver dialog, select Custom from the paper size list in the Paper/Quality tab, then
specify the paper dimensions, then click Save to save your new paper size. To see your new
custom size in the list of custom sizes, you need to exit the printer properties, then reenter
them (and use the More button if necessary).
●
From the Start menu, select Printers and Faxes, then from the File menu select Server
Properties. In the Forms tab, check the Create a new form box, specify the name and
dimensions of the new form, then click Save Form.
●
Under Mac OS X 10.4: select Paper Size > Manage Custom Sizes in the Page Setup dialog.
●
Under Mac OS X 10.2 or 10.3: select Settings > Custom Paper Size from the Page Setup dialog.
●
On the Embedded Web Server's Submit Job page: select Advanced settings > Paper > Page
size > Custom.
Select margins options
By default, the printer leaves a 5 mm margin between the edges of your image and the edges of the
paper (increased to 17 mm at the foot of cut-sheet paper). However, you can change this behavior in
several ways.
●
In the Windows driver dialog: select the Paper/Quality tab and then the Margins/Layout button.
●
In the Mac OS Print dialog (T1100): select the Paper Type/Quality panel and then Layout.
●
In the Mac OS Print dialog (T1100ps): select the Finishing panel and then Layout.
●
On the Embedded Web Server's Submit Job page: select Advanced settings > Paper >
Layout/Margins.
You will then see at least some of the following options.
62
Chapter 6 Printing
ENWW
Pri
n
ting