HP Designjet T1100 MFP series - Manual (Page 59)

5. Insert the edge of the paper into the feeder.
WARNING! Do not push your fingers inside the printer's paper path.
6. Roll the spindle into the feeder until you feel resistance. The printer detects the paper and feeds it
automatically into the printer.
7. Once the paper is fed into the printer, the front-panel display asks if you are loading a roll or a
sheet. Select Roll with the
Up and Down keys and press OK .
8. Select your paper category and type.
TIP: If you have loaded a paper type whose name does not appear in the paper list,
see The paper type is not in the driver on page 150 .
9. The printer checks the alignment and measures the width.
ENWW Load a roll into the 44-inch printer 47
Paper handling