HP Designjet T1100 MFP series - Manual (Page 69)

TIP: If the printer is waiting to nest more pages, you can cancel the waiting time and print the
available pages immediately by pressing the Form feed and cut key .
NOTE: The printer may not cut the paper directly after pressing the Form feed and cut key
, as each time a print is printed the printheads are serviced and the paper cannot be cut until
the process completes.
Remove the cut piece from the output tray.
CAUTION: If strips or short prints are left in the output tray the printer could jam.
NOTE: Photo and coated paper requires careful handling, see The print is scuffed or
scratched on page 167 .
ENWW Feed and cut the paper 57
Paper handling