HP Designjet T1100 MFP series - Manual (Page 55)

6. Roll the spindle into the feeder until you feel resistance. The printer detects the paper and feeds it
automatically into the printer.
7. Once the paper is fed into the printer, the front-panel display asks if you are loading a roll or a
sheet. Select Roll with the
Up and Down keys and press OK .
8. Select your paper category and type.
TIP: If you have loaded a paper type whose name does not appear in the paper list,
see The paper type is not in the driver on page 150 .
9. The printer checks the alignment and measures the width.
10. Look at the front panel; you may find some instructions there.
11. When the roll is aligned, the front panel displays the Ready message and the printer is ready to
print. If the roll is not aligned, follow the instructions on the front-panel display.
12. If the paper is loose on the roll, lightly rewind from the end of the spindle until tight.
ENWW Load a roll into the 24-inch printer 43
Paper handling