HP Designjet T1100 MFP series User Manual
Page 54
Advertising
3.
With both hands, push the spindle into both roll holders at the same time. The spindle snaps into
place.
4.
If the edge of the roll is not straight or torn (sometimes due to tape used to hold end of the roll),
pull paper slightly beyond the cutting groove and use a cutter to cut a straight edge.
TIP:
Cut the paper as straight as possible, as uneven paper does not load correctly.
5.
Insert the edge of the paper into the feeder.
WARNING!
Do not push your fingers inside the printer's paper path.
42
Chapter 5 Paper handling
ENWW
P
ape
r ha
ndl
ing
Advertising
This manual is related to the following products: