HP Designjet T1100 MFP series - Manual (Page 124)

However, you can also manage the queue from the front panel. To do so, select the Job management
menu icon , then Job queue, where you can see a list of the jobs in the queue.
Each has an identifier, comprising:
<position in queue>: <image name>
The job currently being printed has a check mark, canceled jobs have crosses, processing jobs have a
clock, and jobs on hold have a warning.
Prioritize a job in the queue
To make any job in the queue the next one to be printed, select it and choose Reprint (in the Embedded
Web Server) or Move to front (in the front panel).
If nesting is turned on, the prioritized job may still be nested with others. If you really want this job to be
printed next, and on its own on the roll, first turn nesting off and then move it to the front of the queue
as described above.
Delete a job from the queue
Under normal circumstances, there is no need to delete a job from the queue after printing it, as it will
just fall off the end of the queue as more files are sent. However, if you have sent a file in error, and
want to avoid printing it, you can simply delete it, by selecting it and choosing Delete (in the Embedded
Web Server or in the front panel).
In the same way, you can delete a job that has not been printed yet.
If the job is currently being printed (its status is printing in the Web server), and you want both to cancel
the job and to delete it, first click the Cancel icon in the Web server, or press the
Cancel key on the front
panel, and then delete it from the queue.
Reprint or copy a job in the queue
To reprint or make extra copies of any job in the queue, select the job in the Embedded Web Server
and click the Reprint icon, then specify the number of copies you want. The job will be moved to the
top of the queue. To make more than one print of a non-printed job in the queue from the front panel,
select the job and choose Copies, then specify the number of copies required and press the
Select key.
This overrides any value set by your software.
NOTE: If Rotate was On when you sent the file, every copy will be rotated.
You can reprint an already-printed job from the front panel. Select the Job management menu icon
, then select the job from the queue, then select Reprint.
NOTE: You cannot use this method for PCL3 jobs. To reprint old jobs that are PCL3, you may
be able to use your operating system's printer spooler, if you have already set the spooler to save
old jobs. This facility depends on your operating system.
112 Chapter 9 Job queue management ENWW
Job queue