General purpose paper, Photographic paper, Hp banners with tyvek – HP Designjet T1100 MFP series User Manual
Page 163: Black ink is easily removed when touched, General purpose paper photographic paper
General purpose paper
●
For thin papers (< 90 g/m
2
) uncoated papers (for example plain paper or bright white paper) select
paper type Bond and Coated > Plain Paper.
●
For light coated papers (<110 g/m
2
), select paper type Bond and Coated > Coated Paper.
●
For heavyweight coated papers (<200 g/m
2
), select paper type Bond and Coated > Heavyweight
Coated Paper.
●
For cockle-free very thick coated papers (> 200 g/m
2
), select paper type Bond and Coated >
Super Heavyweight Coated Paper.
CAUTION:
Only use this option if you are sure your paper does not wrinkle when printed.
Photographic paper
For photographic paper, select paper type Photo Paper > Photo Matte Paper.
HP Banners with Tyvek®
For HP Banners with Tyvek®, select paper type Photo Paper > Photo Gloss Paper.
Black ink is easily removed when touched
This happens when your paper is incompatible with matte black ink. To use non-matte black ink, select
paper type Photo Paper > Photo Gloss Paper.
After printing, the paper has wrinkles or there is too much ink
This happens when too much ink is used. To use less ink, select a thinner category. Matte paper
categories from thinnest to thickest are:
●
Plain Paper
●
Coated Paper
●
Heavyweight Coated Paper
●
Super Heavyweight Coated Paper
For other image quality problems, see
Troubleshooting print-quality issues on page 159
ENWW
The paper type is not in the driver 151
Paper issu
es