Tcp/ip connection – HP Designjet T1100 MFP series User Manual
Page 28
●
If you find the right printer name, scroll sideways if necessary to see the Connection Type
column, and check that it shows Bonjour/Rendezvous. Then highlight that line. Otherwise,
continue searching further down the list.
●
If you cannot find your printer name with a Bonjour/Rendezvous connection type, check the
box My printer is not in the list.
Click Continue.
10.
Continue following the instructions on the screen. When you reach the Printer Queue Created
screen, click Quit to exit, or Create New Queue if you want to connect another printer to the
network.
11.
When the HP Printer Setup Assistant has finished, you can remove the DVD from the DVD drive.
If the printer driver is already installed, the HP Printer Setup Assistant can be run at any time from the
DVD.
TCP/IP connection
1.
Go to your printer's front panel and press the
Menu
key until you see the status screen.
Note the URL of your printer (http://XXXX11 in this example).
2.
Insert the HP Start-Up Kit DVD into your DVD drive.
16
Chapter 2 Installing the software
ENWW
In
stalling th
e software