HP Designjet T1100 MFP series - Manual (Page 61)

5. Select your paper category and type.
TIP: If you have loaded a paper type whose name does not appear in the paper list,
see The paper type is not in the driver on page 150 .
6. Continue with step five of the easy loading process, skipping steps eight and nine.
TIP: When prints fall into the basket, they can be torn or get ink marks from other prints. To
avoid this, catch your prints as they are cut from the roll and do not stack prints in the basket.
You can also turn off the automatic cutter, see
Turn the automatic cutter on and off
on page 56 , and release your print using the Form feed and cut key .
Unload a roll
Before unloading a roll, check whether there is paper on the roll or if the roll is out of paper, and follow
the appropriate procedure as described below.
Unload paper key procedure with paper on the roll
If there is paper on the roll, use the following procedure.
1.
Press the Unload paper key on the front panel.
2. When prompted by the front-panel display, lift the blue lever on the left.
3. When prompted by the front-panel display, lightly rewind the paper from the end of the spindle until
removed from the printer.
4. When prompted by the front-panel display, lower the blue lever.
Paper menu procedure with paper on the roll
If there is paper on the roll, you can also start the process from the paper menu in the front panel's main
menu.
1.
Press the Menu key to return to the main menu, select the Paper menu icon .
ENWW Unload a roll 49
Paper handling