A&D FX-i SERIES - Manual (Page 50)

48
1 2 3 4 MODE ON
14. CONNECTION TO PERIPHERAL EQUIPMENT
14-1 Connection to the AD-8121B Printer
Set the following parameters to use the AD-8121B printer.
Example of use AD-8121B mode setting
To print A&D standard format weight data, using the FX-
i PRINT key
or FX-
i auto print mode. (The time and date can be added.)
MODE 1
To print A&D standard format weight data, using the AD-8121B DATA
key or AD-8121B built-in timer. (The time and date can be added.)
To print, using the AD-8121B chart printing function.
MODE 2
To print the FX-
i statistical data.
MODE 3
To print GLP output. MODE 3
Class Item and Parameter
Factory
settings
AD-8121B
MODE 1
AD-8121B
MODE 2
AD-8121B
MODE 3
prt
Data output mode
0 0,1,2,4,5 *1 3 0,1,2,4,5 *1
dout
Data output
pU5e
Data output pause
0 0 0 0,1 *2
bp5
Baud rate
2 2 2 2
btpr
Data bit, parity bit
0 0 0 0
Crlf
Terminator
0 0 0 0
5if
Serial
interface
type
Data format
0 0 0 1
*1 Set appropriate parameters for “
ap-p (Auto print polarity)” and “ap-b (Auto print difference) “ when
auto print mode A or B ( prt 1 or 2) is selected.
Set the AD-8121B DIP switch No.3 to ON when unstable data is printed with “ prt 4“.
*2 Set 1 when multiple lines are printed in the FX- i statistical calculation mode.
Notes
Refer to "10-2 GLP Report" for print samples.
Settings of AD-8121B DIP switches
MODE
AD-8121B
DIP switch
Description
MODE 1
1 2 3 4 MODE ON
Print at receiving data.
Standard mode, statistical calculation mode
MODE 2
1 2 3 4 MODE ON
Print by the AD-8121B DATA key operation or AD-8121B built-in timer.
Standard mode, interval mode, chart mode
MODE 3
1 2 3 4 MODE ON
Print at receiving data.
Dump print mode
DIP switch No.3 : Handling unstable data
ON Print
OFF Not printed
Set the DIP switch No.4 to OFF.
1 2 3 4 MODE ON