A&D FX-i SERIES - Manual (Page 60)

58
18. OPTIONS
Note
The FX
i-02, FXi-08 and FXi-09 can not be used at the same time.
FX
i-02 USB interface (Installed in the balance, Applicable OS: Windows 98 OSR2 or later)
Used to transmit the balance weight data (numerical
value only) uni-directionally to a personal computer via
USB.
Can transmit the balance weight data (numerical value
only) directly to other application software such as
Microsoft Excel, Word and memo pad.
Driver installation is not necessary.
FX
i-08 Ethernet interface
Used to connect the balance to a LAN.
The "WinCT-Plus" data communication software is
provided as an accessory and can perform the
following.
Acquire data from multiple balances connected to a
LAN.
Control these balances with commands.
Acquire data transmitted from balances.
Example: When pressing the PRINT key of the balance,
data is output and is acquired by the computer.
The stored data can be used with Microsoft Excel (if
installed).
FX i-09 Built-in battery unit (Ni-HM rechargeable battery pack)
FX
i-10 Small breeze break
Provided for FX-120
i /200i /300i as standard. Can be used for FX-1200i /2000i /3000i.
FX
i-11 Large breeze break
Breeze break with greater height. Can be used for all models. Convenient when a large beaker
or measuring cylinder is used and requires more height.
FX i –02 Example of use
FX i –08 Example of use