HP LaserJet 3150 All-in-One Printer series - Manual (Page 147)

EN Managing logs and reports 145
Setting when transmission reports print
A transmission report contains information about a specific outgoing
fax. You can choose to have this report print each time a fax is sent,
only if the fax failed, or never. The default is If Fax Fails. If you choose
Never, you have no indication a fax failed to transmit unless you print
a fax log.
The value of this setting, which you change at the control panel,
determines when transmission reports print for paper faxes sent from
the control panel. To set when transmission reports print for paper
faxes sent from the Document Assistant and electronic faxes sent by
the JetSuite Pro software, use the software configuration settings.
See the software Help for more information.
To set when transmission reports print
1 Press E NTER /M ENU .
2 Use the < and > keys to select REPORTS and press E NTER /M ENU .
3 Press the > key once to select TRANSMISSION REPORTS and press
E NTER /M ENU .
4 Use the < and > keys to select the option for when you want the
transmission reports to print. You can choose ALWAYS , NEVER , or
IF FAX FAILS .
5 Press E NTER /M ENU to save the selection.
6 Press S TOP /C LEAR to exit the Menu settings.