HP LaserJet 3150 All-in-One Printer series - Manual (Page 257)

EN 255
Gateway 2000
www.au.gw2k.com
1 While your PC is booting, follow the directions on the screen: “To
enter Setup, press F1.”
2 Click on Advanced on the Menu Bar.
3 Choose Integrated Peripherals.
4 Follow the legend directions and choose ECP if it is a choice for
the mode. Otherwise, choose Bi-directional. (ECP mode will
provide the best printing and scanning performance.)
5 Follow the legend directions to save and exit.
HP Pavilion
www.hp.com
1 At the HP Blue Screen, press F1 to enter Setup.
2 Choose Advanced on the Menu Bar.
3 Following the legend directions, choose I/O Device
Configuration, which opens the Peripheral Configuration (for
example, the serial port and parallel port IRQs and modes).
4 Arrow down to Parallel Port Mode.
5 Choose ECP if it is given as a choice for the mode. Otherwise
choose Bi-directional. (ECP mode will provide the best printing
and scanning performance.)
6 Follow the legend directions for saving and exiting.