HP LaserJet 3150 All-in-One Printer series - Manual (Page 79)

EN Features available only through the software 77
Features available only through the software
The following copying features are only available when copying using
the Document Assistant.
● Copying two or more pages on a single sheet (2 up or N up).
● Collating large jobs that don’t fit into the HP LaserJet 3150
product’s memory.
If you have an item you want to copy but it is difficult to read, scan it
into the JetSuite ProDesktop first. Clean up the image and then print.
Hints and help
In this section, find suggestions and answers to commonly asked
questions. See chapter 8, "Troubleshooting and Maintenance," for a
more complete list of common copy quality and usage solutions.
What if...
I want to use more than one of the HP LaserJet 3150 product
functions at the same time? This product is specifically designed to
allow you to do many tasks simultaneously, such as print while
sending a fax.
Jobs also queue and wait until another job finishes. For example, if a
fax is being received while you are printing, the fax is stored in
memory and then prints automatically after the print job finishes. Only
in rare instances will the HP LaserJet 3150 product run out of
memory and cancel one job so it can complete another.
See “Simultaneous tasking features” on page 228 for a complete list
of which features can be used at the same time.
Copies are too light or too dark? Print a test page. If it prints
properly, adjust the contrast before copying. If it does not print
properly, check the print density setting. Or, if the test page was too
light, check to see if the toner cartridge needs to be replaced.
A paper jam occurs while copies are printing? Once you have
removed the jam, the HP LaserJet 3150 product, in most cases,
reprints the jammed page and finishes the rest of the job. Once your
copy job has finished printing, check to make sure all pages printed.