HP Photosmart C7200 Series - Manual (Page 117)

To reprint an original photo
1. Press Reprints for the Scan and Reprint option.
NOTE: You can also press Scan Menu on the control panel for the Scan and
Reprint option.
NOTE: Depending on the paper size you choose, you can place the photo paper
in the photo tray or the main input tray.
2. When prompted, load your original photo print side down on the right front corner of
the glass, and then do one of the following:
To reprint your original photo using the default print settings
▲ Press Print Photos on the control panel.
To change print settings before reprinting your original photo
a. Press OK to change print settings.
The Source of Original screen appears.
b. Press or to highlight any option and press OK.
The Print Layout screen appears.
c. Press or to highlight the print layout pattern and press OK.
NOTE: Depending on the paper size you choose, you might be prompted to
choose a layout for the photos on your pages.
The Scan Preview menu appears.
d. Press or to adjust the number of copies and press OK.
The Reprint Options screen appears.
NOTE: The HP All-in-One scans your original and shows a preview of the
photo on the display.
e. Press OK to select Print Preview .
NOTE: Select Edit Photo to edit photos before printing.
The Print Preview screen appears.
f. Press or to highlight Print Now and press OK (or press Print Photos on the
control panel).
Scan an image
You can start a scan from your computer or from the control panel of the HP All-in-One.
This section explains how to scan from the control panel of the HP All-in-One only.
NOTE: You can also use the software you installed with the HP All-in-One to scan
images. Using this software, you can edit a scanned image and create special projects
using a scanned image.
To use the scan features, the HP All-in-One and computer must be connected and turned
on. The HP All-in-One software must also be installed and running on your computer prior
to scanning. To verify that the HP All-in-One software is running on a Windows computer,
Chapter 9
116 Use the scan features
Scan