HP Photosmart C7200 Series - Manual (Page 135)

To send a fax manually from a connected phone
1. Load your originals print side up into the document feeder tray.
NOTE: This feature is not supported if you load your originals on the glass. You
must load your originals in the document feeder tray.
2. Dial the number by using the keypad on the phone that is connected to the HP All-in-
One.
NOTE: Do not use the keypad on the control panel of the HP All-in-One. You
must use the keypad on your phone to dial the recipient's number.
3. If the recipient answers the telephone, you can engage in a conversation before
sending your fax.
NOTE: If a fax machine answers the call, you will hear fax tones from the
receiving fax machine. Proceed to the next step to transmit the fax.
4. Once you are ready to send the fax, press Start Fax Black or Start Fax Color.
If you were speaking with the recipient before sending the fax, inform the recipient
that they should press Start on their fax machine after they hear fax tones.
The telephone line is silent while the fax is transmitting. At this point, you can hang
up the telephone. If you want to continue speaking with the recipient, remain on the
line until the fax transmission is complete.
Send a fax using monitor dialing
Monitor dialing allows you to dial a number from the control panel as you would dial a
regular telephone. When you send a fax using monitor dialing, you can hear the dial tones,
telephone prompts, or other sounds through the speakers on the HP All-in-One. This
enables you to respond to prompts while dialing, as well as control the pace of your
dialing.
NOTE: Make sure the fax volume is turned on, or you will not hear a dial tone.
To send a fax using monitor dialing from the control panel
1. Load your originals print side up into the document feeder tray. If you are sending a
single-page fax, such as a photograph, you can also load your original print side down
on the glass.
2. Press Start Fax Black or Start Fax Color.
3. Once you hear the dial tone, enter the number by using the keypad on the control
panel.
4. Follow any prompts that might occur.
Your fax is sent when the receiving fax machine answers.
Related topics
• “Adjust the volume” on page 26
• “Set up speed dialing” on page 65
Chapter 11
134 Use the fax features
Fa
x