HP Photosmart C7200 Series - Manual (Page 50)

Use the Wireless Setup Wizard
The Wireless Setup Wizard provides an easy way to set up and manage a wireless
connection to the HP All-in-One.
To run the Wireless Setup Wizard
1. On the control panel of the HP All-in-One, press Setup.
2. Press until Network is highlighted, and then press OK.
3. Press to highlight Wireless Setup Wizard, and then press OK.
This runs the Wireless Setup Wizard.
Related topics
• “Integrated wireless WLAN 802.11 network setup” on page 39
• “Wireless ad hoc network setup” on page 43
View and print network settings
You can display a summary of the network settings on the HP All-in-One control panel,
or you can print a more detailed configuration page. The network configuration page lists
all of the important network settings such as the IP address, link speed, DNS, and mDNS.
To view and print the network settings
1. On the control panel of the HP All-in-One, press Setup.
2. Press until Network is highlighted, and then press OK.
The Network menu appears.
3. Press until View Network Settings is highlighted, and then press OK.
The View Network Settings menu appears.
4. Do one of the following:
•
To display wired network settings, press until Display Wired Summary is
highlighted, and then press OK.
This displays a summary of the wired (Ethernet) network settings.
• To display wireless network settings, press until Display Wireless
Summary is highlighted, and then press OK.
This displays a summary of the wireless network settings.
• To print the network configuration page, press until Print Network
Configuration Page is highlighted, and then press OK.
This prints the network configuration page.
Related topics
“Network configuration page definitions” on page 53
Restore network defaults
You can reset the network settings to what they were when you purchased the HP All-in-
One.
CAUTION: This will erase all wireless setup information that you have entered. In
order to restore this information, you will need to run the Wireless Setup Wizard again.
Connect to a network 49
Finish
set
up