Invalid wep key during wireless setup, Invalid passphrase during wireless setup – HP Photosmart C7200 Series User Manual

Page 189

Advertising
background image

on how to turn on the wireless router, see the documentation that came with your
wireless router.

Cause: The HP All-in-One is not receiving a signal.
Solution: Move the wireless router and the HP All-in-One closer together. Then run
the wireless setup again.
For more information, see:

“Integrated wireless WLAN 802.11 network setup” on page 39

Cause: If you manually entered your network name (SSID), you might have entered
it incorrectly.
Solution: Run the wireless setup process again and enter your network name
(SSID) carefully. Remember that the SSID is case-sensitive.
For more information, see:

“Connect to an integrated wireless WLAN 802.11 network” on page 40

Cause: The setting for MAC address filtering might be enabled on your wireless
router.
Solution: Disable MAC address filtering on your wireless router until the HP All-in-
One has successfully connected to your network. If you re-enable MAC address
filtering on your wireless router, make sure the MAC address of the HP All-in-One is
on the list of acceptable MAC addresses.

Invalid WEP key during wireless setup

Cause: If you are using WEP security, you might have entered the WEP key
incorrectly during the wireless setup process.
Solution: During the wireless setup process, you might have entered the WEP key
incorrectly. Some wireless routers provide up to four WEP keys. The HP All-in-One
uses the first WEP key (selected by the wireless router as the default WEP key). Run
the wireless setup process again and be sure to use the first WEP key provided by
the wireless router. Enter the WEP key exactly as it appears in the wireless router
settings. The WEP key is case sensitive.
If you do not know the WEP key, see the documentation that came with your wireless
router for information on how to access the router's Embedded Web Server. You can
find the WEP key by logging onto the router's Embedded Web Server using a
computer on the wireless network.

Invalid passphrase during wireless setup

Cause: During the wireless setup process, you might have entered the WPA
passphrase incorrectly.

Chapter 15

188

Troubleshooting

T

roub
les
hoot

ing

Advertising
This manual is related to the following products: