Scan a fax to send from memory, Schedule a fax to send later – HP Photosmart C7200 Series User Manual

Page 136

Advertising
background image

Scan a fax to send from memory

You can scan a black-and-white fax into memory and then send the fax from memory.
This feature is useful if the fax number you are trying to reach is busy or temporarily
unavailable. The HP All-in-One scans the originals into memory and sends them once it
is able to connect to the receiving fax machine. After the HP All-in-One scans the pages
into memory, you can immediately remove the originals from the document feeder tray.

To scan a fax to send from memory

1.

Load your originals print side up into the document feeder tray. If you are sending a
single-page fax, such as a photograph, you can also load your original print side down
on the glass.

2.

Press the Fax Menu button twice to advance to the Fax Menu.

3.

Press until Scan and Fax is highlighted, and then press OK.

4.

Enter the fax number by using the keypad.

5.

Press Start Fax Black.

NOTE:

If you press Start Fax Color, the fax will be sent in black and white and

a message appears on the display.

The HP All-in-One scans the originals into memory and sends the fax when the
receiving fax machine is available.

Schedule a fax to send later

You can schedule a black-and-white fax to be sent within the next 24 hours. This enables
you to send a black-and-white fax late in the evening, when phone lines are not as busy
or phone rates are lower, for example. The HP All-in-One automatically sends your fax
at the specified time.
You can only schedule one fax to be sent at a time. You can continue to send faxes
normally, however, while a fax is scheduled.

NOTE:

You cannot schedule a color fax due to memory limitations.

To schedule a fax from the control panel

1.

Load your originals print side up into the document feeder tray.

2.

Press the Fax Menu button twice to advance to the Fax Menu.

3.

Press until Send Fax Later is highlighted, and then press OK.

4.

Enter the send time by using the numeric keypad, and then press OK. If prompted,
press 1 for AM, or 2 for PM.

5.

Enter the fax number by using the keypad.

6.

Press Start Fax Black.
The HP All-in-One scans all pages and the scheduled time appears on the display.
The HP All-in-One sends the fax at the scheduled time.

Send a fax

135

Fax

Advertising
This manual is related to the following products: