HP Photosmart C7200 Series - Manual (Page 53)

Use the Embedded Web Server
If your computer is connected to an HP All-in-One on a network, you can access the
Embedded Web Server that resides in the HP All-in-One. The Embedded Web Server is
a web-based user interface that provides some options not available on the HP All-in-
One control panel, including Webscan, a feature that lets you scan photos and documents
from the HP All-in-One to your computer using a Web browser, and advanced network
security options. Also, the Embedded Web Server enables you to monitor status and
order printer supplies.
For information on how to use the features available in the Embedded Web Server,
including Webscan, see the onscreen help within the Embedded Web Server. To access
Embedded Web Server help, open the Embedded Web Server, then click the Help link
under Other Links on the Embedded Web Server Home tab.
NOTE: Use the Embedded Web Server to change network settings not available on
the control panel.
This section contains the following topics:
• Access the Embedded Web Server
• Use the Embedded Web Server setup wizard
Access the Embedded Web Server
The computer you use to access the Embedded Web Server on the HP All-in-One must
be connected to the same network as the HP All-in-One.
To access the Embedded Web Server
1. Print a network configuration page to find the IP address for the HP All-in-One.
2. In the Address box in your Web browser on your computer, type the IP address of
the HP All-in-One, as shown on the network settings page. For example, http://
192.168.1.101.
The Embedded Web Server Home page appears, showing information for the HP All-
in-One.
NOTE: If you are using a proxy server in your browser, you might need to disable
it to access the Embedded Web Server.
3. If you need to change the language displayed in the Embedded Web Server, do the
following:
a. Click the Settings tab.
b. Click Select Language in the Settings navigation menu.
c. In the Select Language list, click the appropriate language.
d. Click Apply.
4. Click the Home tab to access device and network information, or click the
Networking tab to access more network information or to modify network information.
5. Make any configuration changes.
6. Close the Embedded Web Server.
Related topics
“View and print network settings” on page 49
Chapter 4
52 Finish setting up the HP All-in-One
Finish set
up