HP StorageWorks XP Remote Web Console Software - Manual (Page 129)

2. In the WWN tree, select the product name of the connected external array identifying the external
array's port. The WWNs of all the ports that are connected to the local array and are used
appear in the WWN list.
3. In the WWN list, select the port for which you want to restore the path.
4. Right click, and select Change Parameter. The Change Parameter pane appears ( Figure 60 ).
5. Change the selected port's parameter.
6. Click OK. The Change Parameter pane closes, and the LU Operation pane appears. Selected
items appear in blue italics in the WWN tree and WWN list. The contents of the setting appears
in the Preset list.
To check the setting details, right-click the setting in the Preset list, and select Detail. To cancel
the setting, right-click the setting in the Preset list, and select Delete.
7. Click Apply. A confirmation message appears.
8. Click OK.
Stopping the use of paths to an external LU by specifying a
local array's port (Disconnect Paths)
To stop using the path between the local array and external array by specifying the port of the local
array, select the Port Operation tree. The Port Operation list appears.
1. In the LU Operation pane, select the Port Operation tab. The Port Operation tree and Port
Operation list appear.
2. In the Port Operation tree, select External (the port attribute for the external array connection).
The local array's external ports appear in the Port Operation list.
3. In the Port Operation list, right-click the port of the local array you want to stop using, and select
Disconnect Paths.
Selected items appear in blue italics in the Port tree and Port list. The contents of the setting
appear in the Preset list. To check the setting details, right-click the setting in the Preset list, and
select Detail. To cancel the setting, right-click the setting in the Preset list, and select Delete.
4. Click Apply. A confirmation message appears.
5. Click OK.
Restoring paths to an external LU by specifying a local array's
port (Check Paths)
To restore the path between the local array and external array by specifying the local array's port,
select the Port Operation tree. The Port Operation list appears.
NOTE:
The path must be in a status that can be restored.
1. In the LU Operation pane, select the Port tab. The Port Operation tree and Port Operation list
appear.
XP External Storage Software User Guide 129