Example of xp continuous access journal operations, Using – HP StorageWorks XP Remote Web Console Software User Manual
Page 51
3.
If you set a mainframe-system emulation type when mapping the volume, the mapped volume's
status becomes Blockade. To format the volume, use the CVS function. To restore the volume,
perform the Write to Control Blocks operation if you mapped a volume for which the data area
has already been zero-formatted on the external array side. For instructions, see the HP
StorageWorks XP LUN Configuration and Security Manager user guide: HP XP12000 Disk Array,
HP XP10000 Disk Array, HP 200 Storage Virtualization System.
Go to step 4.
4.
Set the XP Continuous Access pair's P-VOL and S-VOL.
Using external LUs for XP Continuous Access Journal operations
shows an example of using the external LU for XP Continuous Access Journal operations.
The mapped external LU is set as the XP Continuous Access Journal pair's S-VOL, and the volume in
the local array that is connected as the MCU is set as the XP Continuous Access Journal's P-VOL. For
more information, see the HP StorageWorks XP Continuous Access user guide for XP12000/XP10000
Disk Arrays and SVS 200.
Figure 16 Example of XP Continuous Access Journal operations
.
XP External Storage Software User Guide
51