Solution 2: verify the paper size setting, Solution 3: load the stack of paper correctly – HP Photosmart C4580 All-in-One Printer User Manual
Page 144
Solution 2: Verify the paper size setting
Solution: Verify that you have selected the proper paper size setting for your
project. Make sure that you have loaded the correct paper size in the input tray.
Cause: The paper size setting might not have been set correctly for the project you
were printing.
If this did not solve the issue, try the next solution.
Solution 3: Load the stack of paper correctly
Solution: Remove the stack of paper from the input tray, reload the paper, and then
slide the paper width guide inward until it stops at the edge of the paper.
For more information, see:
Cause: The paper guides were not positioned correctly.
If this did not solve the issue, try the next solution.
Solution 4: Load a stack of envelopes correctly in the input tray
Solution: Load a stack of envelopes in the input tray, with the envelope flaps facing
up and to the left.
Make sure that you remove all paper from the input tray before loading the envelopes.
For more information, see:
Cause: A stack of envelopes was loaded incorrectly.
Text or graphics are cut off at the edge of the page
Try the following solutions to resolve the issue. Solutions are listed in order, with the most
likely solution first. If the first solution does not solve the problem, continue trying the
remaining solutions until the issue is resolved.
•
Solution 1: Check the margin settings
•
Solution 2: Check the layout of the document
•
Solution 3: Load the stack of papers correctly
Print troubleshooting
141
Trou
bles
ho
ot
ing