HP Photosmart C4580 All-in-One Printer - Manual (Page 71)

4. Press OK.
A preview image of the scan appears on the display.
5. (Optional) Press Settings to change the Print Size, Borderless setting, or number
of copies. When you are done, press OK.
6. Press the button next to Print.
Scan an image or document
For original documents or images placed on the glass, you can start a scan from your
computer or from the HP All-in-One. This section explains the second option: how to scan
from the control panel of the HP All-in-One to a computer.
To use the scan features, the HP All-in-One and computer must be connected and turned
on. The HP Photosmart Software must also be installed and running on your computer
prior to scanning. To verify that the HP Photosmart Software is running on a Windows
computer, look for the HP Digital Imaging Monitor icon in the system tray at the lower
right side of the screen, near the time.
NOTE: Closing the HP Digital Imaging Monitor icon in the Windows system tray
can cause the HP All-in-One to lose some of its scan functionality. If this happens,
you can restore full functionality by restarting your computer or by starting the
HP Photosmart Software.
NOTE: When scanning, the HP Photosmart Software enables you to save an image
in the following file formats: BMP, DCX, FPX, GIF, JPG, PCD, PCX, and TIF.
To scan to a computer
1. Load your original print side down on the right front corner of the glass.
Chapter 9
68 Use the scan features
Scan