HP Photosmart C4580 All-in-One Printer - Manual (Page 67)

To insert a memory card
1. Make sure the product is on.
2. Insert the memory card into the appropriate slot.
The memory card has a Photo light (below the camera icon) that indicates the status
of the memory card. When it is solid green, your photos are ready to be viewed.
CAUTION: Do not pull out the memory card while the Photo light is flashing. A
flashing light means the product is accessing the memory card. Wait until the light
remains solid. Removing a memory card while it is being accessed might corrupt
information on the card or damage the product or memory card.
NOTE: The product only recognizes the JPG and TIF file formats on your memory
card.
Print photos
The HP All-in-One enables you to print one borderless or bordered photo per page directly
from your memory card, without first having to transfer the files to a computer.
TIP: To achieve the best print quality, HP recommends using HP papers that are
specifically designed for the type of project you are printing along with genuine HP
ink. HP papers and HP ink are specifically designed to work well together to provide
high-quality output.
To print photos
1. Load 10 x 15 cm (4 x 6 inch) photo paper in the input tray.
2. Insert your memory card into the appropriate slot on the product.
NOTE: If there are camera-selected photos on the memory card, the DPOF
Found screen appears. Select OK to print the camera-selected photos, or select
Cancel to browse through the photos on the memory card.
3. Press the buttons next to the up arrow or down arrow icons on the display to scroll
through the photos on your memory card until the photo you want to print appears.
Chapter 8
64 Use the photo features
Photos