Change copy speed or quality – HP Photosmart C4580 All-in-One Printer User Manual
Page 76
4.
Press the button next to Copies to increase the number of copies. When you reach
the maximum, the setting returns to 1 copy.
5.
Press OK.
6.
Press the button next to Start Copy Black or Start Copy Color.
In this example, the product makes six copies of the original 10 x 15 cm (4 x 6 inch)
photo.
Change copy speed or quality
The HP All-in-One, provides three options, indicated by one, two, or three stars, that affect
copy speed and quality:
•
One star copies faster than the other two quality settings. On plain paper, the text is
comparable to the quality of two stars, but the graphics might be of lower quality. This
setting uses less ink and extends the life of your print cartridges.
NOTE:
This setting is not available when the HP All-in-One detects photo paper.
•
Two stars delivers high-quality output and is the recommended setting for most of
your copying. Two stars copies faster than the three stars quality setting.
•
Three stars produces the highest quality output for all paper and eliminates the
banding (striping) effect that sometimes occurs in solid areas. Three stars copies
slower than the other quality settings.
To change the copy quality
1.
Load paper in the input tray.
2.
Load your original print side down on the right front corner of the glass.
Change the copy settings for the current job
73
Us
e the
copy
fea
tures