HP LaserJet 9050 Printer series - Manual (Page 122)

120 Chapter 6 Problem solving ENWW
Cleaning... The printer is processing the cleaning page.
CLEANING DISK
<x>% COMPLETE...
Do not power off
alternates with
For help press
The hard disk or compact flash disk is being cleaned. Contact your network
administrator.
CLOSE RIGHT DOOR
To continue turn off
then on
alternates with
CLOSE RIGHT DOOR
For help press
The right door is open and must be closed for printing to continue.
Creating...
CLEANING PAGE The printer is generating the cleaning page.
DATA RECEIVED
To print last page
press
The printer has received data but is waiting for a form feed or is in the Pause
state.
Deleting... The printer is deleting a stored job.
DIFFERENT PAPER SIZES
IN JOB Different paper sizes are used for a single job in the multifunction finisher.
Verify that all pages in the job are configured for the same size paper.
DUPLEXER ERROR
REMOVE DUPLEXER
Install duplexer with
power off
The duplexer has been removed. Reinsert the duplexer.
EIO X DISK
NOT FUNCTIONAL
For help press
The EIO hard disk is not working correctly.
Remove the EIO hard disk from the slot (a slot number will replace the X)
indicated.
Reseat the EIO hard disk. If the message continues, replace the disk with a
new EIO hard disk.
Event log empty The user is attempting to view an empty event log by selecting SHOW EVENT LOG
from the control panel.
FINISHING PROCESS NOT
FUNCTIONAL
For help press
The external device might not be able to perform the finishing process, but it
could still pass paper. The pages will be completed unfinished.
INCORRECT The wrong PIN was typed.
Return to the previous screen and retype the PIN.
Message Explanation or recommended action