HP LaserJet 9050 Printer series - Manual (Page 38)

36 Chapter 2 Printing tasks ENWW
Loading input trays
This section contains information about loading detectable and undetectable standard-size and
custom-size media into optional Tray 1, Tray 2, Tray 3, and optional Tray 4.
CAUTION To avoid a jam, never add or remove paper from optional Tray 1 or open Tray 2, Tray 3, or optional
Tray 4 while printing from that tray.
To avoid damaging the printer, print labels and envelopes from optional Tray 1 only. Send labels
and envelopes to the left output bin or upper bin. Print on only one side of labels and envelopes.
Loading optional Tray 1
Optional Tray 1, which holds up to 100 sheets, is available for the printer. For paper
specifications, see
Paper specifications .
To load optional Tray 1 for occasional one-time use
Use this procedure if Tray 1 usually remains empty and is used for printing on a variety of sizes
or types of paper.
1 Open optional Tray 1.
2 Load (orient) paper according to the size and the finishing options.
CAUTION To avoid jams, print sheets of labels one sheet at a time.