HP LaserJet 9050 Printer series - Manual (Page 55)

ENWW Orienting media 53
Alternate Letterhead mode
Windows drivers include an Alternate Letterhead mode, which is configured in the Device Settings portion
of the printer properties (in the Windows control panel). This mode causes all print jobs with media types of
Letterhead and Preprinted to be treated as two-sided (duplexed), so that you can load paper in the same
way for one-sided and two-sided printing. Because the print speed is the same as it is for two-sided (duplex)
printing, one-sided jobs print at approximately half-speed.
Labels, Letter, A4 size
sheets, or
transparencies Tray 1
only No
(Never duplex) Long edge toward feed direction; side to be
printed on facing up.
Envelopes Tray 1
only No
(Never duplex) Short edge toward feed direction; side to be
printed on facing up and the postage end
toward the printer. If height of envelope is
greater than 190 mm (7.5 inches), feed flap
first. Otherwise, feed the flap toward the
rear of printer.
Type of media Tray Duplexed Media Orientation
* When Alternate Letterhead mode is enabled and media type Letterhead or Preprinted is
selected, you must orient the media for two-sided (duplex) printing. For more information,
see
Alternate Letterhead mode .