Printing on special paper, Printing labels – HP LaserJet 9050 Printer series User Manual
Page 72
70 Chapter 2 Printing tasks
ENWW
Printing on special paper
This section contains guidelines for printing on special media, which includes letterhead,
transparencies, postcards, and custom-size and heavy paper, and printing full-bleed images.
Printing on letterhead, prepunched paper, or preprinted paper
(single-sided)
●
When printing on letterhead, prepunched, or preprinted paper, be sure to correctly orient the
paper. See
for instructions.
●
If the paper is heavier than 199 g/m
2
(53 lb bond) and less than 216 g/m
2
(58 lb bond) load it
only in optional Tray 1. See
, or go to
or complete paper specifications.
Printing on letterhead, prepunched paper, or preprinted paper
(double-sided)
●
When printing on letterhead, prepunched, or preprinted paper, be sure to correctly orient the
paper. See
for instructions.
●
When printing on both sides of prepunched paper, you must select prepunched paper as the
paper type in the Paper Handling menu from the control panel or select prepunched paper
from your printer driver.
Printing labels
●
Orient labels according to the guidelines in
●
Print a stack of up to 50 sheets of labels from optional Tray 1.
●
Use only labels recommended for laser printers. Make sure the labels meet the correct
specifications. (See
, or go to
www.hp.com/support/lj9050_lj9040
.)
CAUTION
Failure to follow these instructions can damage the printer.
Special cautions:
●
Do not load optional Tray 1 to capacity, because labels are heavier than paper.
●
Do not use labels that are separating from the backing sheet, wrinkled, or damaged in any
way.
●
Do not use labels that have the backing sheet exposed. (Labels must cover the entire
backing sheet with no exposed spaces.)
●
Do not feed a sheet of labels through the printer more than once. The adhesive backing is
designed for only one pass through the printer.
●
Do not print on both sides of labels.