HP LaserJet 9050 Printer series - Manual (Page 128)

126 Chapter 6 Problem solving ENWW
58.xx ERROR
For help press
alternates with
To continue turn off
then on
A temporary printing error occurred.
Turn the printer off, and then turn the printer on.
If this message persists, contact an HP-authorized service or support provider.
(See the HP support flyer or go
to www.hp.com/support/lj9050_lj9040 .
59.xy ERROR
For help press
alternates with
To continue turn off
then on
A temporary printing error occurred.
Turn the printer off, and then turn the printer on.
If this message persists, contact an HP-authorized service or support provider.
(See the HP support flyer or go
to www.hp.com/support/lj9050_lj9040 .
60.x ERROR
For help press
An obstruction prevents the tray specified by xx from lifting paper properly for
feeding.
If this message persists, contact an HP-authorized service or support provider.
(See the HP support flyer or go
to www.hp.com/support/lj9050_lj9040 .
62 NO SYSTEM
To continue turn off
then on.
A problem exists with the printer firmware.
To continue, turn the printer off, and then turn the printer on.
If this message persists, contact an HP-authorized service or support provider.
(See the HP support flyer or go
to www.hp.com/support/lj9050_lj9040 .
64 ERROR
For help press
alternates with
To continue turn off
then on
A scan buffer error occurred.
Turn the printer off, and then turn the printer on.
If this message persists, contact an HP-authorized service or support provider.
(See the HP support flyer or go
to www.hp.com/support/lj9050_lj9040 .
68.x STORAGE ERROR
SETTINGS CHANGED
For help press
alternates with
To continue press
An error occurred in the printer nonvolatile memory (NVRAM), and one or more
printer settings has been reset to its factory default.
Printing can continue, but there might be some unexpected functions because
an error occurred in permanent storage.
Pressing should clear the message.
If this message persists, contact an HP-authorized service or support provider.
(See the HP support flyer or go
to www.hp.com/support/lj9050_lj9040 .
68.x PERMANENT
STORAGE FULL
For help press
alternates with
To continue press
The printer NVRAM is full. Some settings saved in the NVRAM might have
been reset to the factory defaults.
Printing can continue, but there might be some unexpected functions because
an error occurred in permanent storage.
Pressing should clear the message.
If this message persists, contact an HP-authorized service or support provider.
(See the HP support flyer or go
to www.hp.com/support/lj9050_lj9040 .
68.x PERMANENT
STORAGE WRITE FAIL
To continue press
The printer NVRAM is failing to write.
Printing can continue, but there might be some unexpected functions because
an error occurred in permanent storage.
Pressing should clear the message.
If this message persists, contact an HP-authorized service or support provider.
(See the HP support flyer or go
to www.hp.com/support/lj9050_lj9040 .
Message Explanation or recommended action