HP LaserJet 9050 Printer series - Manual (Page 190)

188 Appendix C Printer memory and expansion ENWW
Checking memory installation
Follow this procedure to verify that memory is installed correctly:
1 Check that READY appears on the printer control-panel display when the printer is turned on.
If an error message appears, a DIMM might have been incorrectly installed.
2 Press 22 on the numeric keypad. The configuration page prints.
3 Check the memory section on the configuration page and compare it to the configuration
page printed before the DIMM installation. If the amount of memory has not increased, one
of the following situations might have occurred:
• The memory might not be installed correctly. Repeat the installation procedure.
• The memory might be defective. Try a new DIMM, or try installing the DIMM in a different
slot.
Note If you installed a printer language (personality), check the Installed Personalities and Options
section on the configuration page. This area should list the new printer language.