To clear jams from input areas – HP Color LaserJet 2550 Printer series User Manual
Page 110
Advertising
2. Remove the imaging drum by pushing it away from you and lifting it out of the printer.
You cannot reach jams by removing the print cartridges.
3. Complete one of these steps:
●
If the leading edge of the print media is visible, carefully and slowly pull the print
media out of the printer.
●
If the print media is too difficult to remove, remove the jam as described in
.
4. After the jam has been removed, replace the imaging drum and close the top cover.
5. Press (
G
O
) if the Go light is blinking. If the Attention light continues blinking, then
another jam is present. See
To clear jams from input areas
To clear jams from input areas
1. Open tray 2 or optional tray 3 to expose the jam.
100
Chapter 7 Problem solving
ENWW
Advertising