HP Color LaserJet 2550 Printer series - Manual (Page 39)

4. Place print media into the tray with the side to be printed up, and the top, short edge in
first.
Note If you are manually duplexing, see Printing on both sides (duplexing manually) for loading
instructions.
5. Slide the media-width guides inward until they lightly touch the print media stack on both
sides without bending it. Make sure that the print media fits under the tabs on the media-
width guides.
CAUTION Wait for the printer to finish printing before closing tray 1. Closing the tray before the printer
finishes can cause jams.
6. On the back of the printer, lower the rear output door if you are printing on special
media, such as labels, envelopes, or heavy or light paper, to prevent curl.
Loading optional tray 2
Paper includes average-weight letterhead and prepunched paper. For additional information
about letterhead and prepunched paper, see
Printing on letterhead or preprinted forms .
CAUTION Print on special print media such as labels and transparencies from tray 1 only. Printing on
special print media from optional tray 2 or optional tray 3 can cause jams. Do not fan paper
before loading it into trays, and avoid overloading trays.
ENWW Loading trays 29